OLD MASTER PRODUCTS

Hardwood Flooring and Mouldings

By

QuickCoat

DuraSeal QuickCoat Hardwood floor stain

  • Coverage: First coat – approximately 500 square feet per gallon.
  • Dry Time and Cure: Approximately 2-3 hours.
  • Note: Dry time is based on conditions of 77° and 50% relative humidity.
  • Available in 36 colors
  • Optional second coat – approximately 800 sq. ft. per gallon.
  • Compatible with all DuraSeal Water-Based Polyurethanes.
  • Compatible with all DuraSeal Oil-Based Polyurethanes
  • Excellent resistance to water and chemicals.

CONTACT US

Category: Tag:

Description

DuraSeal® Quick Coat Penetrating Finish is a semi-transparent stain formulated to seal, color and provide exceptional durability when used on bare wood and masonry surfaces. This rich blend of oil and resin gives hardwood floors a soft, satiny sheen. Its unique formulation provides a surface that can be topcoated in two hours. DuraSeal® Quick Coat Penetrating Finish is available in existing DuraSeal® colors as well as many Certified Minwax® colors. It can be used with or without a finish coat, and is compatible with all DuraSeal® water-borne and oil-modified finish systems.

SURFACE PREPARATION

  1. Properly prepare floor according to NWFA specifications. Use a No.100 grit screen for the final screening cut.
  2. Remove all dust with a vacuum and tack surface with a clean cloth moistened with mineral spirits.

APPLICATION

  1. Shake material thoroughly before and occasionally during use. Apply to a small test area before proceeding with the entire job to ensure desired color. If desired, DuraSeal® Quick Coat Penetrating Finish #110 Neutral can be used to lighten any standard DuraSeal® wood tone.
  2. Apply the first coat of DuraSeal® Quick Coat Penetrating Finish liberally with a brush, lambswool applicator or cloth at approximately 500 square feet per gallon.
  3. Allow to penetrate for 5-8 minutes, then remove excess by wiping with rags or by buffing with #2 steel wool. Removal of all excess material is essential to ensure proper dry time and adhesion of the finish coat.
  4. If desired, apply a thin second coat at a coverage rate of approximately 800 square feet per gallon. Allow to penetrate and remove excess material in the same manner as the first coat (step 3 above).
  5. Allow the final coat to dry at least 2 hours and apply a DuraSeal® finish coat of your choice.

IMPORTANT

Place rags, steel wool and other waste immediately after use in a sealed, water-filled metal container. See cautionary statement

DRY TIME AND CURE

Approximately 2-3 hours. Note: Dry time is based on conditions of 77° and 50% relative humidity.

COVERAGE

First coat – approximately 500 square feet per gallon. Optional second coat – approximately 800 sq.ft. per gallon.

CLEAN UP

Application tools should be cleaned with mineral spirits or paint thinner immediately after use.

SOLVENT

Non-photochemically reactive.

MAINTENANCE

Regularly remove dust and dirt by sweeping or vacuuming. Periodic buffing will renew luster. Exceptionally worn areas may require an additional finish coat. Maintain floors sealed only with DuraSeal® Quick Coat Penetrating Finish with DuraSeal® Renovator Cleaner and Reconditioner.

STORAGE

Store at room temperature. If stored at high temperature, cool to room temperature before use. Keep from freezing.

AVAILABLE IN

TYPE SIZE PROD. NO. QTY PDS GHS SDS
TRUE BLACK QT 861990000 12 PDS SDS
HERITAGE BROWN QT 861860000 4 PDS SDS
AGED BARREL QT 861850000 4 PDS SDS
DARK GRAY QT 861840000 4 PDS SDS
WARM GRAY QT 861830000 4 PDS SDS
RUSTIC BEIGE QT 861820000 4 PDS SDS
SILVERED GRAY QT 861810000 4 PDS SDS
JACOBEAN QT 861750000 12 PDS SDS
ESPRESSO QT 861730000 12 PDS SDS
CLASSIC GRAY QT 861720000 4 PDS SDS
DARK WALNUT QT 861710000 12 PDS SDS
WEATHERED OAK QT 861700000 4 PDS SDS
GUNSTOCK QT 861500000 12 PDS SDS
GOLDEN PECAN QT 861450000 12 PDS SDS
SEDONA RED QT 861430000 12 PDS SDS
FRUITWOOD QT 861410000 12 PDS SDS
COLONIAL MAPLE QT 861400000 12 PDS SDS
ROSEWOOD QT 861390000 12 PDS SDS
SPICE BROWN QT 861370000 12 PDS SDS
CHERRY QT 861350000 12 PDS SDS
ENGLISH CHESTNUT QT 861330000 12 PDS SDS
EBONY QT 861310000 12 PDS SDS
EARLY AMERICAN QT 861300000 12 PDS SDS
MEDIUM BROWN QT 861280000 12 PDS SDS
RED MAHOGANY QT 861250000 12 PDS SDS
SPECIAL WALNUT QT 861240000 12 PDS SDS
COFFEE BROWN QT 861230000 12 PDS SDS
MESQUITE QT 861220000 12 PDS SDS
GOLDEN BROWN QT 861210000 12 PDS SDS
ANTIQUE BROWN QT 861160000 12 PDS SDS
GOLDEN OAK QT 861120000 12 PDS SDS
PROVINCIAL QT 861110000 12 PDS SDS
NEUTRAL QT 861100000 12 PDS SDS
ROYAL MAHOGANY QT 861080000 12 PDS SDS
CHESTNUT QT 861040000 12 PDS SDS
NUTMEG QT 861020000 12 PDS SDS
TRUE BLACK GAL 811990000 6 PDS SDS
HERITAGE BROWN GAL 811860000 4 PDS SDS
AGED BARREL GAL 811850000 4 PDS SDS
DARK GRAY GAL 811840000 4 PDS SDS
WARM GRAY GAL 811830000 4 PDS SDS
RUSTIC BEIGE GAL 811820000 4 PDS SDS
SILVERED GRAY GAL 811810000 4 PDS SDS
JACOBEAN GAL 811750000 6 PDS SDS
ESPRESSO GAL 811730000 6 PDS SDS
CLASSIC GRAY GAL 811720000 4 PDS SDS
DARK WALNUT GAL 811710000 6 PDS SDS
WEATHERED OAK GAL 811700000 4 PDS SDS
GUNSTOCK GAL 811500000 6 PDS SDS
GOLDEN PECAN GAL 811450000 6 PDS SDS
SEDONA RED GAL 811430000 6 PDS SDS
FRUITWOOD GAL 811410000 6 PDS SDS
COLONIAL MAPLE GAL 811400000 6 PDS SDS
ROSEWOOD GAL 811390000 6 PDS SDS
SPICE BROWN GAL 811370000 6 PDS SDS
CHERRY GAL 811350000 6 PDS SDS
ENGLISH CHESTNUT GAL 811330000 6 PDS SDS
EBONY GAL 811310000 6 PDS SDS
EARLY AMERICAN GAL 811300000 6 PDS SDS
MEDIUM BROWN GAL 811280000 6 PDS SDS
RED MAHOGANY GAL 811250000 6 PDS SDS
SPECIAL WALNUT GAL 811240000 6 PDS SDS
COFFEE BROWN GAL 811230000 6 PDS SDS
MESQUITE GAL 811220000 6 PDS SDS
GOLDEN BROWN GAL 811210000 6 PDS SDS
ANTIQUE BROWN GAL 811160000 6 PDS SDS
GOLDEN OAK GAL 811120000 6 PDS SDS
PROVINCIAL GAL 811110000 6 PDS SDS
NEUTRAL GAL 811100000 6 PDS SDS
ROYAL MAHOGANY GAL 811080000 6 PDS SDS
CHESTNUT GAL 811040000 6 PDS SDS
NUTMEG GAL 811020000 6 PDS SDS
COUNTRY WHITE GAL 811010000 4 PDS SDS

PHYSICAL PROPERTIES

Density (lbs/gal) 6.9 – 7.5
% Solids 33 – 42
Viscosity – CPS 22 – 65
VOC 550 g/l or 4.6 lb/gal max.

Related products